Home > News > Content

Welding Design Principle Of Steel Tower

Qingdao Wuxiao | Updated: Oct 10, 2017

Overhead transmission line through the wire with insulators and gold set on the tower above, so that the wire to the ground and buildings to maintain a certain distance, to achieve long-distance power transmission function. Compared with cable transmission, overhead transmission has the advantages of less investment and convenient maintenance, so it has been widely used. For higher voltage level overhead lines generally choose load bearing capacity, small footprint, long service life of the tower as a support. However, due to the design defects of some types of old lines, there exists the disadvantage of wind load and poor icing-resisting ability, and the inverted tower accident in the process of use, it needs to be strengthened and treated.Steel Tower

When the iron tower is welded and reinforced, both the angle steel and the original angle of the transmission tower have galvanized layer, which overcomes the influence of the galvanized layer on the quality of the weld is the key to ensure the reinforcement quality. In addition, in the transmission tower welding to strengthen the need for high-altitude welding operations, welding position is mainly vertical welding, so in the selection of welding methods need to consider these factors.Steel Tower Arc welding of electrode is one of the most widely used and most common metal welding methods in production at present. The electrode arc welding has good position adaptability, and the suitable electrode can be used for all position welding. The coating of the electrode is composed of a gas-making agent, a slag-making agent and a ferroalloy. During the welding process, the above substances produce high temperature reaction to form slag gas protection. Slag formed by slagging agent can be a good protection of molten drops and molten pool, avoid oxidation with air contact, and the gas formed by gas-making agent reaction will isolate the weld area from air.Steel Tower

The influence of the galvanized layer on the welding process can be effectively overcome by the characteristics of the joint protection of slag gas by arc welding of electrode. Therefore, compared with other welding methods, arc welding is a suitable method for the welding of transmission towers.Steel Tower


Our Service

Customer supreme good faith; Technology Industrial serve the country and rejuvenating; People-oriented respect for individuality;

Feedback

Contact Us

Address:No.553 East Lanzhou Road, Jiaozhou, Qingdao, Shandong, China

Tel: +86-532-81120580

Fax: +86-532-82275396

E-mail: hxf@wuxiao.cn

CopyRight© Qingdao Wuxiao